LM5100CSDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 10 |
| Nominal Supply Current | 2mA |
| Output Current | 1A |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 990ns |
| Fall Time (Typ) | 715 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
LM5100CSDX Overview
For greater flexibility, its 10-WDFN Exposed Pad package is used.A packaging method of Tape & Reel (TR) is indicated.This device is equipped with 2 drivers for its configuration.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~14V.The gate type on this device is N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration starts with 10 terminations.Many related parts can be found under its base part number LM5100.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 10 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has a total of 10 component pins.A high-side voltage can be set up to 118V (Bootstrap).Mosfet driver supports an output current of 1A.A quiescent current of 200μA is the current consumed by a part when left unaffected by external influences.
LM5100CSDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100CSDX Applications
There are a lot of Texas Instruments LM5100CSDX gate drivers applications.
- Power factor correction (PFC) circuits
- Motor controllers
- Isolated Supplies for controller area network (CAN),
- Active filtering
- Uninterruptible Power Supplies (UPS)
- High-speed communications
- Dual-Battery Systems
- Digitally controlled power supplies
- PCMCIA applications
- UPS systems
