LM5100MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.8A |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Turn Off Time | 0.045 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5100MX Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.It's mounted on the way to Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~14V supply voltage.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device allows temperatures in the range of -40°C~125°C TJ.This program uses the input type of Non-Inverting.The configuration is based on 8 terminations.There are numerous related parts listed under its base part number LM5100.In this case, Surface Mount indicates how the device is mounted.When the device is designed, it has 8 pins.In order to operate, a voltage of 12V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The board has 8 component pins.Max (Bootstrap) can be as high as 118V.1.8A is the maximum output current supported by the device.
LM5100MX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
LM5100MX Applications
There are a lot of Texas Instruments LM5100MX gate drivers applications.
- DC-DC Converters
- PCMCIA applications
- Telecom switch mode power supplies
- A/D drivers
- Automotive Applications
- Multicolor LED/laser displays
- RGB applications
- Broadcast equipment
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
