LM5101AM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5101 |
| Pin Count | 8 |
| Output Voltage | 118.3V |
| Max Output Current | 3A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Propagation Delay | 26 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Max Output Voltage | 18.3V |
| Rise Time | 430ns |
| Fall Time (Typ) | 260 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5101AM Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is used.Configuration is based on 2 drivers.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 9V~14V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.The input type is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number LM5101, various related parts can be found.The mount method is Surface Mount.In the device, there are 8 pins.With a supply voltage of 12V, it is designed to operate.There is a maximum output current of 3A.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.A boot strap voltage of 118V is the maximum possible high-side voltage.Mosfet driver supports an output current of 3A.Mosfet gate drivers outputs 118.3V as voltage.A quiescent current of 200μA is the current consumed by a part when left unaffected by external influences.At maximum output voltage, 18.3V should be used.
LM5101AM Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101AM Applications
There are a lot of Texas Instruments LM5101AM gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- High power buffers
- High-voltage isolated DC-DC converters
- Solar power supplies
- Portable Navigation Devices
- Industrial Motor Inverter - Power Tools, Robotics
- Telecom switch mode power supplies
- Motor Controls
- Pulse transformer drivers
- High current laser/LED systems
