LM5101AMX/NOPB
| Parameters | |
|---|---|
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5101 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Propagation Delay | 26 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 430ns |
| Fall Time (Typ) | 260 ns |
| Turn-Off Delay Time | 4 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Turn On Time | 45 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 45 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
LM5101AMX/NOPB Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A package of Tape & Reel (TR) has been used.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~14V.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 8 terminations.There are various related parts under its base part number LM5101.Mosfet driver is mounted using Surface Mount.The pins are configured with 8 when designing the chip.With a supply voltage of 12V, it is designed to operate.In the maximum case, the output current can be limited to 3A.There are several useful electronic components in this subcategory of MOSFET Drivers.The component has 8 pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 118V.There are 2 outputs integrated for its basis.3A is the maximum output current supported by the device.Its quiescent current at 200μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5101AMX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101AMX/NOPB Applications
There are a lot of Texas Instruments LM5101AMX/NOPB gate drivers applications.
- High power buffers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Welding
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Telecom switch mode power supplies
- Motor Drives
- A/D drivers
- General Purpose 3-Phase Inverter
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
