LM5101BSD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5101 |
| Pin Count | 10 |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5101BSD Overview
Its 10-WDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.The configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~14V.Gate type N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~125°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is based on 10 terminations.There are various parts that can be found under its base part number LM5101.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 10 pins when designing.A voltage of 12V is required for its operation.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 10 component pins is available.There can be a voltage up to 118V on the high-side (Bootstrap).The output current of this device can be set to 2A.Its quiescent current at 200μA is the current it consumes when not affected by external factors.
LM5101BSD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101BSD Applications
There are a lot of Texas Instruments LM5101BSD gate drivers applications.
- Motor Drives
- White Goods - Air Conditioner, Washing Machine,
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Refrigerator
- Motor Controls
- DC/DC converters
- Active filtering
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Dual-Battery Systems
