LM5101BSD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5101 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Propagation Delay | 26 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 4 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5101BSD/NOPB Overview
In order to increase flexibility, the package 10-WDFN Exposed Pad is used.A packaging method of Tape & Reel (TR) is used.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~14V supply voltage.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.This program uses the input type of Non-Inverting.It's configured with 10 terminations.There are numerous related parts listed under its base part number LM5101.The mount method is Surface Mount.There are 10 pins available in the device.A voltage of 12V is required for its operation.There is a maximum output current of 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 118V.Based on its basis, it integrates 2 outputs.The output current can be set to 2A.Its quiescent current at 200μA refers to the amount of current it consumes when unaffected by external factors.
LM5101BSD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101BSD/NOPB Applications
There are a lot of Texas Instruments LM5101BSD/NOPB gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- DC-DC Converters
- Industrial Modules
- PCMCIA applications
- UPS systems
- High-speed communications
- DC/DC converters
- High frequency line drivers
- Motor Control
- 3-Phase Motor Inverter Driver
