LM5101BSDX
| Parameters | |
|---|---|
| Turn On Delay Time | 4 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5101 |
| Pin Count | 10 |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
LM5101BSDX Overview
Its 10-WDFN Exposed Pad package is adopted for higher flexibility.Tape & Reel (TR) represents the packaging method.This device is equipped with 2 drivers for its configuration.Surface Mount is mounted in the way.In the absence of a 9V~14V supply voltage, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~125°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 10 terminations.There are various parts that can be found under its base part number LM5101.Devices are mounted by Surface Mount.There are 10 pins available in the device.In order to operate, a voltage of 12V has to be applied.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 10 component pins is available.Ideally, the high-side voltage should not exceed 118V.Mosfet gate drivers can deliver a current of 2A.A part's quiescent current at 200μA is the amount of current consumed when it is not affected by external factors.
LM5101BSDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101BSDX Applications
There are a lot of Texas Instruments LM5101BSDX gate drivers applications.
- Digitally controlled power supplies
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Line drivers
- Broadcast equipment
- Solar power supplies
- Industrial Motor Inverter - Power Tools, Robotics
- DC/DC converters
- 3-Phase Motor Inverter Driver
- High-speed communications
