LM5101CMA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5101 |
| Pin Count | 8 |
| Output Voltage | 118.3V |
| Max Output Current | 1A |
| Nominal Supply Current | 2mA |
| Output Current | 1A |
| Propagation Delay | 26 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Max Output Voltage | 100V |
| Rise Time | 990ns |
| Fall Time (Typ) | 715 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5101CMA Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A package of Tube has been used.A total of 2 drivers are integrated into its configuration.It's mounted on the way to Surface Mount.Using a 9V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration is based on 8 terminations.You will find various related parts under the base part number LM5101.Mosfet driver is mounted using the Surface Mount method.A total of 8 pins are available on the device.With a supply voltage of 12V, it is designed to operate.There is a maximum output current of 1A.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.Ideally, the high-side voltage should not exceed 118V.The output current of this device can be set to 1A.118.3V is the output voltage.When not affected by external factors, this part consumes its quiescent current at 200μA.A maximum voltage of 100V should be maintained for the output voltage.
LM5101CMA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101CMA Applications
There are a lot of Texas Instruments LM5101CMA gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- High-speed communications
- Portable computers
- LCD/LCoS/DLP portable and embedded pico projectors
- Video amplifiers
- General Purpose 3-Phase Inverter
- Industrial Modules
- High frequency line drivers
- RGB applications
- Telecom switch mode power supplies
