LM5101CSDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5101 |
| Max Output Current | 1A |
| Nominal Supply Current | 2mA |
| Output Current | 1A |
| Propagation Delay | 26 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 990ns |
| Fall Time (Typ) | 715 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5101CSDX/NOPB Overview
The 10-WDFN Exposed Pad package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 9V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~125°C TJ.Non-Inverting is used as the input type.There are 10 terminations to form the base of its configuration.The base part number LM5101 refers to a number of related parts.Surface Mount is the way it takes to mount the device.The pins are configured with 10 when designing the chip.Mosfet driver is designed specifically to run on 12V volts of power.In the maximum case, the output current can be 1A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Max (Bootstrap) can be as high as 118V.1A is the maximum output current supported by the device.Its quiescent current at 200μA is the current it consumes when not affected by external factors.
LM5101CSDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5101CSDX/NOPB Applications
There are a lot of Texas Instruments LM5101CSDX/NOPB gate drivers applications.
- High-speed communications
- Motor Drives
- General Purpose 3-Phase Inverter
- PCMCIA applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Solar inverters
- Motor Control
- High current laser/LED systems
- Multicolor LED/laser displays
- Portable Media Players
