LM5101MX/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5101 |
| Pin Count | 8 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.8A |
| Propagation Delay | 56 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5101MX/NOPB Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tape & Reel (TR) represents the package.Configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 9V~14V, it can demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.Under its base part number LM5101, various related parts can be found.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.A supply voltage of 12V is required for operation.1.8A is the maximum output current.Components with 8 pins are available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 118V.The output current can be set to 1.8A.
LM5101MX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
LM5101MX/NOPB Applications
There are a lot of Texas Instruments LM5101MX/NOPB gate drivers applications.
- Isolated Supplies for Motor Control
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Power Supplies
- Telecom switch mode power supplies
- Line drivers
- High current laser/LED systems
- Motor Drives
- Motor controllers
- Active filtering
- 3-Phase Motor Inverter Driver
