LM5101SD/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM5101 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.8A |
| Propagation Delay | 56 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
LM5101SD/NOPB Overview
In order to increase flexibility, the package 10-WDFN Exposed Pad is used.Tape & Reel (TR) represents the package.Configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is 9V~14V it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is used as its input type.The configuration starts with 10 terminations.The base part number LM5101 refers to a number of related parts.Devices are mounted by Surface Mount.When the device is designed, it has 10 pins.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver is possible to achieve a maximum output current of 1.8A.The number of component pins is 10.Ideally, the high-side voltage should not exceed 118V.
LM5101SD/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
LM5101SD/NOPB Applications
There are a lot of Texas Instruments LM5101SD/NOPB gate drivers applications.
- High current laser/LED systems
- Digitally controlled power supplies
- 3-Phase Motor Inverter Driver
- Dual-Battery Systems
- Isolated Supplies for controller area network (CAN),
- High-voltage isolated DC-DC converters
- Broadcast equipment
- Portable Media Players
- Industrial Motor Inverter - Power Tools, Robotics
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
