LM5102MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 860μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5102MM Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package offers greater flexibility.There is a package in the form of Tape & Reel (TR).Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~14V supply voltage.A gate type of N-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 10 terminations.There are various related parts under its base part number LM5102.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 10 pins.In order to operate, a voltage of 12V has to be applied.There is a maximum output current of 1.8A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has 10 component pins.A high-side voltage can be set up to 118V (Bootstrap).Mosfet driver is based on a basis of 2 outputs that have been integrated.This device supports a current output of 1.8A at the output.For higher stability, the supply current should be kept at 3mA.Its quiescent current at 400μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5102MM Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102MM Applications
There are a lot of Texas Instruments LM5102MM gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- UPS systems
- Portable Navigation Devices
- Refrigerator
- RGB applications
- Portable Media Players
- A/D drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated switch mode power supplies (SMPS)
- Line drivers
