LM5102MMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5102MMX Overview
A higher degree of flexibility is achieved by adopting its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) is the packaging method.This configuration includes 2 drivers.Surface Mount is mounted in the way.When the supply voltage is 9V~14V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.-40°C~125°C TJ is the allowed temperature range for this device.This program uses the input type of Non-Inverting.It's configured with 10 terminations.Numerous related parts are available for its base part number LM5102.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 10 pins.Specification is for 12V supply voltage operation.Mosfet driver is possible for the output current to be as low as 1.8A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A total of 10 pins are available for component connections.Maximum (Bootstrap) voltage is 118V.1.8A is the maximum output current supported by the device.Mosfet gate drivers is recommended that you keep the supply current at 3mA in order to achieve greater stabilMosfet gate driversy.Its quiescent current at 400μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5102MMX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102MMX Applications
There are a lot of Texas Instruments LM5102MMX gate drivers applications.
- Solar power supplies
- Telecom switch mode power supplies
- Motor Control
- Power factor correction (PFC) circuits
- Pulse transformer drivers
- A/D drivers
- Topologies
- Smart Phones
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
