LM5102MMX/NOPB
| Parameters | |
|---|---|
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
LM5102MMX/NOPB Overview
In order to increase flexibility, the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) is used.A packaging method of Tape & Reel (TR) is used.Surface Mount is mounted in the way of the device.When the supply voltage is 9V~14V it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is used as the input type.Its configuration starts with 10 terminations.There are various parts that can be found under its base part number LM5102.Surface Mount is the way it takes to mount the device.When the device is designed, it has 10 pins.The device is specifically designed to function with a supply voltage of 12V V.In the maximum case, the output current can be 1.8A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There are 10 component pins on the board.Ideally, the high-side voltage should not exceed 118V.In terms of its basis, there are 2 outputs integrated.An output current of 1.8A is supported.If you want a stable supply current, you should keep it at 3mA.A part's quiescent current at 400μA is the amount of current consumed when it is not affected by external factors.
LM5102MMX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102MMX/NOPB Applications
There are a lot of Texas Instruments LM5102MMX/NOPB gate drivers applications.
- High power buffers
- Broadcast equipment
- A/D drivers
- RGB applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Digitally controlled power supplies
- Portable computers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
- White Goods - Air Conditioner, Washing Machine,
