LM5102SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5102SD Overview
A higher degree of flexibility is achieved by adopting its 10-WDFN Exposed Pad package.Gate drivers is packaged in the way of Tape & Reel (TR).In this case, gate drivers is mounted along the way of Surface Mount.By using 9V~14V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration is based on 10 terminations.Numerous related parts can be found under its base part number LM5102.Mosfet driver is mounted using Surface Mount.As a result, it is configured with 10 pins when it is designed.The device is specifically designed to operate at 12V volts.As a maximum, there is 1.8A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 10.Maximum (Bootstrap) voltage can be up to 118V.For its basis, 2 outputs are integrated.1.8A is the maximum output current supported by the device.To maintain higher stability, the supply current should always be 3mA.Its quiescent current at 400μA refers to the amount of current it consumes when unaffected by external factors.
LM5102SD Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102SD Applications
There are a lot of Texas Instruments LM5102SD gate drivers applications.
- Isolated Gate Driver Supplies
- Industrial Modules
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Welding
- Power factor correction (PFC) circuits
- Broadcast equipment
- Refrigerator
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
