LM5102SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5102 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5102SDX Overview
The 10-WDFN Exposed Pad package offers greater flexibility.Tape & Reel (TR) is the form of the package.The configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 9V~14V supply voltage, it can demonstrate its superiority.This gate type has a N-Channel MOSFET design.This device can operate at temperatures up to -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.Mosfet driver is based on 10 terminations.There are various related parts under its base part number LM5102.Mosfet driver is mounted using the Surface Mount method.As a result, it is configured with 10 pins when it is designed.This device operates with 12V supply voltage.There is an output current limit of 1.8A for this device.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 10 component pins.Ideally, the high-side voltage should not exceed 118V.The output current of this device can be set to 1.8A.To increase stability, keep the supply current at 3mA.A quiescent current of 400μA is the current consumed by a part when left unaffected by external influences.
LM5102SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5102SDX Applications
There are a lot of Texas Instruments LM5102SDX gate drivers applications.
- Portable Media Players
- High-speed communications
- A/D drivers
- Motor controllers
- Video amplifiers
- serial peripheral interface (SPI), I2C
- General Purpose 3-Phase Inverter
- High-voltage isolated DC-DC converters
- Topologies
- White Goods - Air Conditioner, Washing Machine,
