LM5104M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5104 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 56 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Output Polarity | TRUE AND INVERTED |
| Release Time | 10 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5104M/NOPB Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.A package of Tube has been used.Surface Mount is mounted in the way of the device.When the supply voltage is 9V~14V it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Inverting, Non-Inverting is used as the input type in this program.Its configuration starts with 8 terminations.Many related parts can be found under its base part number LM5104.The device is mounted using Surface Mount.The pins are configured with 8 when designing the chip.Specification is for 12V supply voltage operation.Mosfet driver is possible for the output current to be as low as 1.8A.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 8 component pins.Ideally, the high-side voltage should not exceed 118V.The basis of the model has 2 outputs integrated.The output current supported by the device is 1.8A.Mosfet gate drivers is recommended that you keep the supply current at 3mA in order to achieve greater stabilMosfet gate driversy.14V is the output voltage.Its quiescent current at 400μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5104M/NOPB Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104M/NOPB Applications
There are a lot of Texas Instruments LM5104M/NOPB gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Motor Inverter - Power Tools, Robotics
- DC/DC converters
- Active filtering
- Isolated Gate Driver Supplies
- Motor Controls
- Solar power supplies
- High-voltage isolated DC-DC converters
- Commercial and agricultural vehicles (CAV)
- Video amplifiers
