LM5104MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5104 |
| Pin Count | 8 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 56 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5104MX Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.There are 2 drivers installed for this device.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~14V supply voltage.There is a gate type of N-Channel MOSFET in this design.For this device, the temperature range is -40°C~125°C TJ.Input type of Inverting, Non-Inverting is used.The configuration starts with 8 terminations.There are numerous related parts listed under its base part number LM5104.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver is possible for the output current to be as low as 1.8A.There are several useful electronic components within its subcategory MOSFET Drivers.On the board, there are 8 component pins.Max (Bootstrap) can be as high as 118V.This device supports a current output of 1.8A at the output.In order to ensure greater stability, it is recommended to keep the supply current at 3mA.Its quiescent current at 400μA describes its current consumption when not influenced by external factors.
LM5104MX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104MX Applications
There are a lot of Texas Instruments LM5104MX gate drivers applications.
- Power factor correction (PFC) circuits
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Refrigerator
- Uninterruptible Power Supplies (UPS)
- General Purpose 3-Phase Inverter
- Solar power supplies
- Industrial Power Supplies
- Multicolor LED/laser displays
- Motor controllers
- A/D drivers
