LM5104SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5104 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 56 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5104SD Overview
A higher level of flexibility is provided by its 10-WDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.A supply voltage of 9V~14V demonstrates its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.The input type is Inverting, Non-Inverting.The configuration is based on 10 terminations.There are various parts that can be found under its base part number LM5104.Surface Mount is the way it takes to mount the device.The pins are configured with 10 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver is possible for the output current to be as low as 1.8A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has a total of 10 component pins.High-side voltage - Max (Bootstrap) can be as low as 118V.Mosfet gate drivers can deliver a current of 1.8A.Keeping the supply current at 3mA ensures greater stability.Its quiescent current at 400μA describes its current consumption when not influenced by external factors.
LM5104SD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104SD Applications
There are a lot of Texas Instruments LM5104SD gate drivers applications.
- Multicolor LED/laser displays
- A/D drivers
- Motor controllers
- Topologies
- High power buffers
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
- Industrial Modules
- Industrial Motor Inverter - Power Tools, Robotics
- Portable computers
