LM5104SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5104 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 350mV |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 56 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5104SD/NOPB Overview
A higher degree of flexibility is achieved by adopting its 10-WDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is used.The device is mounted in the direction of Surface Mount.Using a 9V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.The gate type on this device is N-Channel MOSFET.In this device, temperatures must not exceed -40°C~125°C TJ.Inverting, Non-Inverting is used as the input type.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5104.Surface Mount is the way it takes to mount the device.When the device is designed, it has 10 pins.A supply voltage of 12V is required for operation.There is a maximum output current of 1.8A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 10 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 118V.There are 2 outputs integrated for its basis.The output current can be set to 1.8A.If you want a stable supply current, you should keep it at 3mA.Mosfet gate drivers produces a voltage of 350mV.When not affected by external factors, this part consumes its quiescent current at 400μA.
LM5104SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104SD/NOPB Applications
There are a lot of Texas Instruments LM5104SD/NOPB gate drivers applications.
- AC-DC Inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Portable Media Players
- High frequency line drivers
- DC-DC Converters
- RGB applications
- Solar power supplies
- High-speed communications
- Telecom switch mode power supplies
- Motor Drives
