LM5104SDX
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5104 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
LM5104SDX Overview
In order to increase flexibility, the package 10-WDFN Exposed Pad is used.A packaging method of Tape & Reel (TR) is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way.When the supply voltage is set to 9V~14V, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Inverting, Non-Inverting is used as the input type.Mosfet driver is based on 10 terminations.There are various parts that can be found under its base part number LM5104.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 10 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver is possible for the output current to be as low as 1.8A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The component has 10 pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 118V.This device is capable of delivering 1.8A current.To increase stability, keep the supply current at 3mA.A part's quiescent current at 400μA is the amount of current consumed when it is not affected by external factors.
LM5104SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104SDX Applications
There are a lot of Texas Instruments LM5104SDX gate drivers applications.
- Refrigerator
- Portable Media Players
- High current laser/LED systems
- Broadcast equipment
- Topologies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Head-up and Head mounted displays
- A/D drivers
- Smart Phones
- Motor Drives
