LM5104SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5104 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 3mA |
| Output Current | 1.8A |
| Max Supply Current | 3mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 400μA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5104SDX/NOPB Overview
The 10-WDFN Exposed Pad package offers greater flexibility.A packaging method of Tape & Reel (TR) is used.The device is mounted in the direction of Surface Mount.When the supply voltage is 9V~14V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~125°C TJ.Inverting, Non-Inverting is the input type used in this program.Its configuration starts with 10 terminations.Numerous related parts can be found under its base part number LM5104.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 10 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is an output current limit of 1.8A for this device.Several electronic components are included in its subcategory of MOSFET Drivers.10 pins are present on the component.Ideally, the high-side voltage should not exceed 118V.Mosfet driver is based on a basis of 2 outputs that have been integrated.1.8A is the maximum output current supported by the device.Mosfet gate drivers is recommended to keep the supply current at 3mA to ensure greater stabilMosfet gate driversy.A part's quiescent current at 400μA is the amount of current consumed when it is not affected by external factors.
LM5104SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5104SDX/NOPB Applications
There are a lot of Texas Instruments LM5104SDX/NOPB gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- High-speed communications
- Smart Phones
- RGB applications
- Dual-Battery Systems
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Control
- DC-DC Converters
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
