LM5105SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5105 |
| Pin Count | 10 |
| Output Voltage | 118.3V |
| Max Output Current | 1.8A |
| Nominal Supply Current | 1.65mA |
| Output Current | 1.8A |
| Propagation Delay | 595 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 595 ns |
| Max Output Voltage | 18.3V |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.705 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.8A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5105SD Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.Gate drivers is packaged in the way of Tape & Reel (TR).This device is equipped with 2 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.By using 8V~14V supply voltage, it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is the input type used in this program.Initially, the configuration is composed of 10 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5105.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 10 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.There is a maximum output current of 1.8A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 10.Maximum (Bootstrap) voltage is 118V.The output current supported by the device is 1.8A.In this case, it produces a voltage of 118.3V.When not affected by external factors, its quiescent current at 400μA refers to how much current this part consumes.A maximum output voltage of 18.3V should be maintained.
LM5105SD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5105SD Applications
There are a lot of Texas Instruments LM5105SD gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Power factor correction (PFC) circuits
- Refrigerator
- Motor Control
- DC-DC Converters
- Active filtering
- Digitally controlled power supplies
- Isolated Supplies for Motor Control
- Commercial air-conditioning (CAC)
- Welding
