LM5105SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5105 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 118.3V |
| Max Output Current | 1.8A |
| Voltage | 14V |
| Nominal Supply Current | 1.65mA |
| Output Current | 1.8A |
| Propagation Delay | 595 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 595 ns |
| Max Output Voltage | 18.3V |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Synchronous |
| Turn On Time | 0.705 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.8A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5105SD/NOPB Overview
The 10-WDFN Exposed Pad package offers greater flexibility.The packaging method is indicated by Tape & Reel (TR).Surface Mount is the way in which it is mounted.By using 8V~14V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 10 terminations.There are numerous related parts listed under its base part number LM5105.The device is mounted with Surface Mount.When designing, the device is configured with 10 pins.A supply voltage of 12V is required for operation.There is a maximum output current of 1.8A.There are several useful electronic components within its subcategory MOSFET Drivers.The number of component pins is 10.There can be a voltage up to 118V on the high-side (Bootstrap).In terms of its basis, there are 2 outputs integrated.1.8A is the maximum output current supported by the device.As a result, a voltage of 118.3V is produced.Its quiescent current at 400μA refers to the amount of current it consumes when unaffected by external factors.Mosfet driver ic is recommended that the maximum output voltage be kept at 18.3V.
LM5105SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5105SD/NOPB Applications
There are a lot of Texas Instruments LM5105SD/NOPB gate drivers applications.
- Welding
- Active filtering
- Industrial Motor Inverter - Power Tools, Robotics
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- Portable Media Players
- Smart Phones
- Commercial and agricultural vehicles (CAV)
- A/D drivers
- 3-Phase Motor Inverter Driver
