LM5105SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5105 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 1.65mA |
| Output Current | 1.8A |
| Propagation Delay | 595 ns |
| Quiescent Current | 400μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 595 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.705 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.8A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5105SDX Overview
A higher level of flexibility is provided by its 10-WDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.By using 8V~14V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is the input type used in this program.10 terminations constitute its foundation.There are various parts that can be found under its base part number LM5105.You mount it with Surface Mount.During design, it is configured with 10 pins.A supply voltage of 12V is required for operation.Mosfet driver is possible to achieve a maximum output current of 1.8A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 10 component pins is available.Ideally, the high-side voltage should not exceed 118V.The device is capable of delivering a current of 1.8A.When not affected by external factors, its quiescent current at 400μA refers to how much current this part consumes.
LM5105SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 400μA
LM5105SDX Applications
There are a lot of Texas Instruments LM5105SDX gate drivers applications.
- AC-DC Inverters
- Head-up and Head mounted displays
- Industrial motor drives - compact, standard, premium, servo drives
- High-voltage isolated DC-DC converters
- Industrial Modules
- DC/DC converters
- Motor Controls
- Power factor correction (PFC) circuits
- Solar power supplies
- serial peripheral interface (SPI), I2C
