LM5106MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5106 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18.3V |
| Max Output Current | 1.8A |
| Nominal Supply Current | 2.1mA |
| Output Current | 1.8A |
| Propagation Delay | 690 ns |
| Quiescent Current | 340μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 690 ns |
| Max Output Voltage | 100V |
| Rise Time | 15ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Channel Type | Synchronous |
| Turn On Time | 0.69 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5106MM Overview
There is greater flexibility with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Gate drivers is package in Tape & Reel (TR) case.Surface Mount is mounted in the way of the device.In the absence of a 8V~14V supply voltage, it can demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as the input type.There are 10 terminations to form the base of its configuration.Numerous related parts can be found under its base part number LM5106.In this case, Surface Mount indicates how the device is to be mounted.Devices have 10 pins available.In addition, it is specifically designed to operate with a supply voltage of 12V.In the maximum case, the output current can be limited to 1.8A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 10 component pins is available.The high-side voltage - Max (Bootstrap) can be up to 118V.For its basis, there are 2 outputs integrated.An output current of 1.8A is supported.In this case, it outputs 18.3V voltage.A part's quiescent current at 340μA is the amount of current consumed when it is not affected by external factors.In this case, 100V should be set as the maximum output voltage.
LM5106MM Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 340μA
LM5106MM Applications
There are a lot of Texas Instruments LM5106MM gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- High-speed communications
- Dual-Battery Systems
- Motor Controls
- High current laser/LED systems
- Solar inverters
- Topologies
- PCMCIA applications
- UPS systems
