LM5106MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5106 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 18.3V |
| Max Output Current | 1.8A |
| Nominal Supply Current | 2.1mA |
| Output Current | 1.8A |
| Propagation Delay | 690 ns |
| Quiescent Current | 340μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 690 ns |
| Max Output Voltage | 100V |
| Rise Time | 15ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Channel Type | Synchronous |
| Turn On Time | 0.69 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5106MM/NOPB Overview
A higher degree of flexibility is achieved by adopting its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) represents the packaging method.Surface Mount is mounted in the way.WGate driversh a 8V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.-40°C~125°C TJ is the allowed temperature range for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 10 terminations.Numerous related parts can be found under its base part number LM5106.Mosfet driver is mounted using Surface Mount.The pins are configured with 10 when designing the chip.A voltage of 12V is required for its operation.There is an output current limit of 1.8A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 10 component pins is available.Maximum (Bootstrap) voltage can be up to 118V.Based on its basis, it integrates 2 outputs.The output current supported by the device is 1.8A.Mosfet gate drivers outputs 18.3V as voltage.A part's quiescent current at 340μA is the amount of current consumed when it is not affected by external factors.Mosfet driver ic is recommended to keep the maximum output voltage at 100V.
LM5106MM/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 340μA
LM5106MM/NOPB Applications
There are a lot of Texas Instruments LM5106MM/NOPB gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Pulse transformer drivers
- Automotive Applications
- Line drivers
- Topologies
- Telecom switch mode power supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Power factor correction (PFC) circuits
- Solar inverters
- High-voltage isolated DC-DC converters
