LM5106SD
| Parameters | |
|---|---|
| Rise / Fall Time (Typ) | 15ns 10ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.69 µs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5106 |
| Pin Count | 10 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 2.1mA |
| Output Current | 1.8A |
| Propagation Delay | 690 ns |
| Quiescent Current | 340μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 690 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 10 ns |
LM5106SD Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.Tape & Reel (TR) is the form of the package.A total of 2 drivers are integrated into its configuration.Surface Mount is mounted in the way of the device.A supply voltage of 8V~14V demonstrates its superiority.N-Channel MOSFET is the gate type used for this design.-40°C~125°C TJ is the allowed temperature range for this device.Non-Inverting is the input type used in this program.The configuration starts with 10 terminations.There are various parts that can be found under its base part number LM5106.The device is mounted with Surface Mount.In the device, there are 10 pins.In order to operate, a voltage of 12V has to be applied.There is a maximum output current of 1.8A that can be achieved.This subcategory of MOSFET Drivers has a number of useful electronic components.10 pins are present on the component.The high-side voltage - Max (Bootstrap) can be up to 118V.1.8A is the maximum output current supported by the device.Its quiescent current at 340μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5106SD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 340μA
LM5106SD Applications
There are a lot of Texas Instruments LM5106SD gate drivers applications.
- Refrigerator
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Isolated Gate Driver Supplies
- DC/DC converters
- DC-DC Converters
- High-speed communications
- Smart Phones
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
