LM5106SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5106 |
| Pin Count | 10 |
| Nominal Supply Current | 2.1mA |
| Output Current | 1.8A |
| Quiescent Current | 340μA |
| Input Type | Non-Inverting |
| Rise Time | 15ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.69 μs |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5106SDX Overview
The 10-WDFN Exposed Pad package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.2 drivers are incorporated for its configuration.In the direction of Surface Mount, gate drivers is mounted.By using 8V~14V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.There are 10 terminations to form the base of its configuration.There are various parts that can be found under its base part number LM5106.Surface Mount is the way it takes to mount the device.Devices have 10 pins available.The device is specifically designed to operate at 12V volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.10 pins are present on the component.High-side voltage - Max (Bootstrap) can be as low as 118V.This device supports a current output of 1.8A at the output.A quiescent current of 340μA is the current consumed by a part when left unaffected by external influences.
LM5106SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 340μA
LM5106SDX Applications
There are a lot of Texas Instruments LM5106SDX gate drivers applications.
- Active filtering
- Multicolor LED/laser displays
- Automotive Applications
- Power factor correction (PFC) circuits
- DC/DC converters
- Portable Media Players
- Motor controllers
- PCMCIA applications
- High current laser/LED systems
- Video amplifiers
