LM5106SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5106 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Nominal Supply Current | 2.1mA |
| Output Current | 1.8A |
| Propagation Delay | 690 ns |
| Quiescent Current | 340μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 690 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.8A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5106SDX/NOPB Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.Gate drivers is package in Tape & Reel (TR) case.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 8V~14V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.This program uses the input type of Non-Inverting.Initially, the configuration is composed of 10 terminations.There are various related parts under its base part number LM5106.The mount method is Surface Mount.As a result, it is configured with 10 pins when it is designed.The device is specifically designed to function with a supply voltage of 12V V.In the maximum case, the output current can be limited to 1.8A.Its subcategory of MOSFET Drivers contains various useful electronic components.There can be a voltage up to 118V on the high-side (Bootstrap).The basis of this model has 2 outputs integrated.The output current supported by the device is 1.8A.Its quiescent current at 340μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5106SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 340μA
LM5106SDX/NOPB Applications
There are a lot of Texas Instruments LM5106SDX/NOPB gate drivers applications.
- High current laser/LED systems
- General Purpose 3-Phase Inverter
- Solar power supplies
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Power Supplies
- Motor Control
- Telecom switch mode power supplies
- serial peripheral interface (SPI), I2C
- Video amplifiers
