LM5107SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5107 |
| Pin Count | 8 |
| Max Output Current | 1.4A |
| Nominal Supply Current | 3.4mA |
| Output Current | 1.4A |
| Max Supply Current | 3.4mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 300μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5107SDX Overview
In order to increase flexibility, the package 8-WDFN Exposed Pad is used.Gate drivers is package in Tape & Reel (TR) case.There are 2 drivers installed for this device.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 8V~14V V, it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.-40°C~125°C TJ is the allowed temperature range for this device.Non-Inverting is used as its input type.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number LM5107.You mount it with Surface Mount.When the device is designed, it has 8 pins.The device is specifically designed to function with a supply voltage of 12V V.1.4A is the maximum output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 118V.An output current of 1.4A is supported.In order to ensure greater stability, it is recommended to keep the supply current at 3.4mA.A quiescent current of 300μA is the amount of current this part consumes when it is not being impacted by outside factors.
LM5107SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 300μA
LM5107SDX Applications
There are a lot of Texas Instruments LM5107SDX gate drivers applications.
- Line drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Power Supplies
- Dual-Battery Systems
- Pulse transformer drivers
- A/D drivers
- Portable Media Players
- High-voltage isolated DC-DC converters
- Automotive Applications
- Smart Phones
