LM5107SDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5107 |
| Pin Count | 8 |
| Max Output Current | 1.4A |
| Nominal Supply Current | 3.4mA |
| Output Current | 1.4A |
| Max Supply Current | 3.4mA |
| Propagation Delay | 56 ns |
| Quiescent Current | 300μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.3A 1.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5107SDX/NOPB Overview
For greater flexibility, its 8-WDFN Exposed Pad package is used.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.By using 8V~14V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number LM5107.You mount it with Surface Mount.When the device is designed, it has 8 pins.A supply voltage of 12V is required for operation.The maximum output current can amount to 1.4A.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 8 pins for component connections.Max (Bootstrap) can be as high as 118V.The output current supported by the device is 1.4A.Keeping the supply current at 3.4mA ensures greater stability.A quiescent current of 300μA is the amount of current this part consumes when it is not being impacted by outside factors.
LM5107SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 300μA
LM5107SDX/NOPB Applications
There are a lot of Texas Instruments LM5107SDX/NOPB gate drivers applications.
- Portable Navigation Devices
- Smart Phones
- Portable computers
- PCMCIA applications
- High power buffers
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
- DC-DC Converters
- High current laser/LED systems
- Video amplifiers
