LM5109AMAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | LM5109 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Nominal Supply Current | 1.8mA |
| Output Current | 1A |
| Propagation Delay | 32 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 2 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 108V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5109AMAX/NOPB Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 8V~14V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device can operate at temperatures up to -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number LM5109.The device is mounted with Surface Mount.In the device, there are 8 pins.A supply voltage of 12V is required for operation.There is a maximum output current of 1A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.A boot strap voltage of 108V is the maximum possible high-side voltage.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current can be set to 1A.Its quiescent current at 200μA describes its current consumption when not influenced by external factors.
LM5109AMAX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 108V
Quiescent current of 200μA
LM5109AMAX/NOPB Applications
There are a lot of Texas Instruments LM5109AMAX/NOPB gate drivers applications.
- Pulse transformer drivers
- serial peripheral interface (SPI), I2C
- Active filtering
- Isolated switch mode power supplies (SMPS)
- Refrigerator
- Solar power supplies
- Motor Control
- UPS systems
- Smart Phones
- Industrial Modules
