LM5109ASD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5109 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1.8mA |
| Output Current | 1A |
| Propagation Delay | 32 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 2 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 108V |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5109ASD Overview
For greater flexibility, the 8-WDFN Exposed Pad package is adopted.A packaging method of Tape & Reel (TR) is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 8V~14V.Gate type N-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number LM5109.The mount method is Surface Mount.There are 8 pins available in the device.The device is specifically designed to function with a supply voltage of 12V V.There is an output current limit of 1A for this device.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.Maximum (Bootstrap) voltage can be up to 108V.This device is capable of delivering 1A current.Its quiescent current at 200μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5109ASD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 108V
Quiescent current of 200μA
LM5109ASD Applications
There are a lot of Texas Instruments LM5109ASD gate drivers applications.
- 3-Phase Motor Inverter Driver
- Digitally controlled power supplies
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- Portable Media Players
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- Smart Phones
- Isolated Supplies for controller area network (CAN),
