LM5109ASDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5109 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1.8mA |
| Output Current | 1A |
| Propagation Delay | 32 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 2 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| High Side Voltage - Max (Bootstrap) | 108V |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5109ASDX Overview
In order to increase flexibility, the package 8-WDFN Exposed Pad is used.Tape & Reel (TR) is the packaging method.2 drivers are incorporated for its configuration.The device is mounted in the direction of Surface Mount.In the absence of a 8V~14V supply voltage, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.You will find various related parts under the base part number LM5109.The mount method is Surface Mount.During design, it is configured with 8 pins.With a supply voltage of 12V, it is designed to operate.The maximum output current can amount to 1A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A total of 8 pins are available for component connections.A boot strap voltage of 108V is the maximum possible high-side voltage.This device supports a current output of 1A at the output.Its quiescent current at 200μA refers to the amount of current it consumes when unaffected by external factors.
LM5109ASDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 108V
Quiescent current of 200μA
LM5109ASDX Applications
There are a lot of Texas Instruments LM5109ASDX gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Power factor correction (PFC) circuits
- Automotive Applications
- Head-up and Head mounted displays
- Isolated Supplies for controller area network (CAN),
- UPS systems
- Motor controllers
- Portable Navigation Devices
- PCMCIA applications
- Motor Control
