LM5109BSDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5109 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1.8mA |
| Output Current | 1A |
| Propagation Delay | 32 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 2 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.056 μs |
| High Side Voltage - Max (Bootstrap) | 108V |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5109BSDX Overview
The 8-WDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way.Using a 8V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This gate type has a N-Channel MOSFET design.In this device, temperatures must not exceed -40°C~125°C TJ.Input type of Non-Inverting is used.It's configured with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5109.Devices are mounted by Surface Mount.As a result, it is configured with 8 pins when it is designed.A voltage of 12V is required for its operation.Mosfet driver is possible to achieve a maximum output current of 1A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The number of component pins is 8.Maximum (Bootstrap) voltage can be up to 108V.The device is capable of delivering a current of 1A.A part's quiescent current at 200μA is the amount of current consumed when it is not affected by external factors.
LM5109BSDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 108V
Quiescent current of 200μA
LM5109BSDX Applications
There are a lot of Texas Instruments LM5109BSDX gate drivers applications.
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Video amplifiers
- DC/DC converters
- Topologies
- Isolated Supplies for Motor Control
- Portable Media Players
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- AC-DC Inverters
- Broadcast equipment
