LM5110-1M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5110 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-1M Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.Tube represents the package.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 3.5V~14V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.The input type for this program is Non-Inverting.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number LM5110.You mount it with Surface Mount.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The maximum output current can amount to 5A.On the board, there are 8 component pins.For its basis, 2 outputs are integrated.Mosfet gate drivers can deliver a current of 5A.Keeping the supply current at 2mA ensures greater stability.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5110-1M Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5110-1M Applications
There are a lot of Texas Instruments LM5110-1M gate drivers applications.
- DC-DC Converters
- Automotive Applications
- Isolated Supplies for controller area network (CAN),
- Line drivers
- Welding
- Active filtering
- Industrial motor drives - compact, standard, premium, servo drives
- Refrigerator
- Smart Phones
- Portable computers
