LM5110-1MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | LM5110 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.753mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-1MX Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way of the device.A supply voltage of 3.5V~14V demonstrates its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.There is a temperature range for this device of -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Many related parts can be found under its base part number LM5110.The device is mounted with Surface Mount.During design, it is configured with 8 pins.A supply voltage of 12V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.There is an output current limit of 5A for this device.8 pins are present on the component.The device is capable of delivering a current of 5A.As a precaution, make sure the supply current is kept at 2mA.Its quiescent current at 1mA refers to the amount of current it consumes when unaffected by external factors.
LM5110-1MX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5110-1MX Applications
There are a lot of Texas Instruments LM5110-1MX gate drivers applications.
- High current laser/LED systems
- Industrial Modules
- Portable Media Players
- High-speed communications
- Pulse transformer drivers
- Active filtering
- Motor Control
- Power factor correction (PFC) circuits
- Broadcast equipment
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
