LM5110-1SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 μs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-1SDX Overview
Gate drivers provides greater flexibilGate driversy to use the 10-WDFN Exposed Pad package.Tape & Reel (TR) represents the packaging method.This configuration includes 2 drivers.Its recommended mounting way is Surface Mount.A supply voltage of 3.5V~14V demonstrates its superiority.A gate type of N-Channel MOSFET is used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is the input type used in this program.There are 10 terminations to form the base of its configuration.You will find various related parts under the base part number LM5110.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is configured wMosfet driverh 10 pins when designing.The device is specifically designed to operate at 12V volts.Its interface IC is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.An output current as high as 5A can be achieved at maximum power.There are 10 component pins on the board.The output current of this device can be set to 5A.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.Its quiescent current at 1mA is the current it consumes when not affected by external factors.
LM5110-1SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-1SDX Applications
There are a lot of Texas Instruments LM5110-1SDX gate drivers applications.
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Digitally controlled power supplies
- Motor Control
- Multicolor LED/laser displays
- 3-Phase Motor Inverter Driver
- Portable Media Players
- PCMCIA applications
- High-voltage isolated DC-DC converters
