LM5110-1SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5110-1SDX/NOPB Overview
A higher degree of flexibility is achieved by adopting its 10-WDFN Exposed Pad package.Gate drivers is packaged in the way of Tape & Reel (TR).Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 3.5V~14V, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type for this program is Non-Inverting.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.Under its base part number LM5110, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.The pins are configured with 10 when designing the chip.A supply voltage of 12V is required for operation.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There is a maximum output current of 5A that can be achieved.A total of 10 pins are available for component connections.Based on its basis, it integrates 2 outputs.An output current of 5A is supported.To ensure high stability, the supply current should be kept at 2mA.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5110-1SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-1SDX/NOPB Applications
There are a lot of Texas Instruments LM5110-1SDX/NOPB gate drivers applications.
- Smart Phones
- Digitally controlled power supplies
- Isolated Supplies for Motor Control
- serial peripheral interface (SPI), I2C
- Motor Controls
- Motor Drives
- Telecom switch mode power supplies
- Welding
- High current laser/LED systems
- AC-DC Inverters
