LM5110-2M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | LM5110 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.753mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-2M Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the package.Surface Mount is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.5V~14V.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.In this device, temperatures must not exceed -40°C~125°C TJ.This program uses the input type of Inverting.The configuration is based on 8 terminations.You will find various related parts under the base part number LM5110.In this case, Surface Mount indicates how the device is mounted.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to function with a supply voltage of 12V V.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.There is a maximum output current of 5A that can be achieved.A total of 8 pins are available for component connections.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.5A is the maximum output current supported by the device.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.Its quiescent current at 1mA refers to the amount of current it consumes when unaffected by external factors.
LM5110-2M Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5110-2M Applications
There are a lot of Texas Instruments LM5110-2M gate drivers applications.
- Broadcast equipment
- High frequency line drivers
- Portable computers
- Pulse transformer drivers
- Telecom switch mode power supplies
- Commercial and agricultural vehicles (CAV)
- Solar inverters
- DC/DC converters
- Isolated Supplies for Motor Control
- Isolated Gate Driver Supplies
