LM5110-2SD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 μs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-2SD Overview
Its 10-WDFN Exposed Pad package provides greater flexibility.Tape & Reel (TR) is the form of the package.There are 2 drivers installed for this device.There is a mounting bracket in the way of Surface Mount.By using 3.5V~14V supply voltage, it is able to demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Input type of Inverting is used.There are 10 terminations to form the base of its configuration.Many related parts can be found under its base part number LM5110.The device is mounted with Surface Mount.The pins are configured with 10 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.There is a maximum output current of 5A.Components with 10 pins are available.Mosfet driver supports an output current of 5A.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5110-2SD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-2SD Applications
There are a lot of Texas Instruments LM5110-2SD gate drivers applications.
- Telecom switch mode power supplies
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Digitally controlled power supplies
- Solar power supplies
- Industrial Power Supplies
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
