LM5110-2SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5110-2SD/NOPB Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.Surface Mount is the way in which it is mounted.When the supply voltage is set to 3.5V~14V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~125°C TJ.Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5110.The device is mounted with Surface Mount.As a result, it is configured with 10 pins when it is designed.A voltage of 12V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 5A volts.The board has 10 component pins.For its basis, 2 outputs are integrated.An output current of 5A is supported.If you want a stable supply current, you should keep it at 2mA.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5110-2SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-2SD/NOPB Applications
There are a lot of Texas Instruments LM5110-2SD/NOPB gate drivers applications.
- General Purpose 3-Phase Inverter
- Motor Drives
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- RGB applications
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Motor Controls
- Industrial Power Supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
