LM5110-2SDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 μs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-2SDX Overview
Its 10-WDFN Exposed Pad package is adopted for higher flexibility.Tape & Reel (TR) is the packaging method.There are 2 drivers installed for this device.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.5V~14V.Gate type N-Channel MOSFET is designed for it.Temperature range -40°C~125°C TJ is allowed for this device.This program uses the input type of Inverting.There are 10 terminations to form the base of its configuration.Under its base part number LM5110, various related parts can be found.The mount method is Surface Mount.In the device, there are 10 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is employed as its interface IC.Mosfet driver is possible for the output current to be as low as 5A.The board has 10 component pins.Mosfet driver supports an output current of 5A.Keeping the supply current at 2mA ensures greater stability.A quiescent current of 1mA is the amount of current this part consumes when it is not being impacted by outside factors.
LM5110-2SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-2SDX Applications
There are a lot of Texas Instruments LM5110-2SDX gate drivers applications.
- Digitally controlled power supplies
- High-voltage isolated DC-DC converters
- Broadcast equipment
- Multicolor LED/laser displays
- Uninterruptible Power Supplies (UPS)
- Portable Navigation Devices
- Industrial Power Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Pulse transformer drivers
- Line drivers
