LM5110-2SDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5110-2SDX/NOPB Overview
The 10-WDFN Exposed Pad package offers greater flexibility.Gate drivers is package in Tape & Reel (TR) case.A total of 2 drivers are integrated into its configuration.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 3.5V~14V supply voltage, its superiority can be demonstrated.N-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~125°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.There are 10 terminations to form the base of its configuration.Numerous related parts are available for its base part number LM5110.Surface Mount is the way it takes to mount the device.In the device, there are 10 pins.A voltage of 12V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be limited to 5A.The component has 10 pins.Mosfet driver supports an output current of 5A.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.When not affected by external factors, its quiescent current at 1mA refers to how much current this part consumes.
LM5110-2SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-2SDX/NOPB Applications
There are a lot of Texas Instruments LM5110-2SDX/NOPB gate drivers applications.
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Welding
- Automotive Applications
- Solar power supplies
- Solar inverters
- Dual-Battery Systems
- Refrigerator
- RGB applications
- 3-Phase Motor Inverter Driver
