LM5110-3M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | LM5110 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.753mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-3M Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tube represents the packaging method.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.5V~14V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Input type of Inverting, Non-Inverting is used.Its configuration is based on a total of 8 terminations.Under its base part number LM5110, various related parts can be found.The device is mounted with Surface Mount.There are 8 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.In the maximum case, the output current can be limited to 5A.The board contains 8 pins for component connections.The output current can be set to 5A.If you want a stable supply current, you should keep it at 2mA.A quiescent current of 1mA is the current consumed by a part when left unaffected by external influences.
LM5110-3M Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5110-3M Applications
There are a lot of Texas Instruments LM5110-3M gate drivers applications.
- Line drivers
- High-speed communications
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for Motor Control
- Motor controllers
- Telecom switch mode power supplies
- Smart Phones
- High frequency line drivers
- Portable Navigation Devices
- Portable computers
