LM5110-3MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | LM5110 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 1.753mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5110-3MX Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 3.5V~14V supply voltage, it can demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.The base part number LM5110 refers to a number of related parts.You mount it with Surface Mount.In the device, there are 8 pins.The device is specifically designed to operate at 12V volts.Its interface IC is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.Mosfet driver is possible for the output current to be as low as 5A.Components with 8 pins are available.Mosfet gate drivers can deliver a current of 5A.As a precaution, make sure the supply current is kept at 2mA.Its quiescent current at 1mA refers to the amount of current it consumes when unaffected by external factors.
LM5110-3MX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5110-3MX Applications
There are a lot of Texas Instruments LM5110-3MX gate drivers applications.
- Industrial Power Supplies
- Topologies
- A/D drivers
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Isolated Supplies for controller area network (CAN),
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
