LM5110-3SD/NOPB
| Parameters | |
|---|---|
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
LM5110-3SD/NOPB Overview
Gate drivers provides greater flexibilGate driversy to use the 10-WDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is indicated.In the direction of Surface Mount, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.5V~14V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.Temperature range -40°C~125°C TJ is allowed for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.The configuration is based on 10 terminations.Many related parts can be found under its base part number LM5110.Devices are mounted by Surface Mount.When the device is designed, it has 10 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is an output current limit of 5A for this device.10 pins are present on the component.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current can be set to 5A.Keeping the supply current at 2mA ensures greater stability.A quiescent current of 1mA is the amount of current this part consumes when it is not being impacted by outside factors.
LM5110-3SD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-3SD/NOPB Applications
There are a lot of Texas Instruments LM5110-3SD/NOPB gate drivers applications.
- RGB applications
- Commercial and agricultural vehicles (CAV)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
- Solar power supplies
- Refrigerator
- Isolated Gate Driver Supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
