LM5110-3SDX
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 μs |
| Built-in Protections | UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
LM5110-3SDX Overview
Gate drivers provides greater flexibilGate driversy to use the 10-WDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is used.This configuration includes 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 3.5V~14V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~125°C TJ.Input type of Inverting, Non-Inverting is used.Its configuration is based on a total of 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5110.The device is mounted using Surface Mount.At the time of design, it is configured with 10 pins.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.Mosfet driver is possible for the output current to be as low as 5A.10 pins are present on the component.5A is the maximum output current supported by the device.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.When this part is unaffected by external factors, its quiescent current at 1mA should be considered.
LM5110-3SDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-3SDX Applications
There are a lot of Texas Instruments LM5110-3SDX gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Motor Control
- High frequency line drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Automotive Applications
- High-speed communications
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Drives
- UPS systems
