LM5110-3SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5110 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Built-in Protections | UNDER VOLTAGE |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5110-3SDX/NOPB Overview
The 10-WDFN Exposed Pad package provides greater flexibility.Tape & Reel (TR) represents the package.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 3.5V~14V supply voltage, its superiority can be demonstrated.Gate type N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~125°C TJ.The input type for this program is Inverting, Non-Inverting.Its configuration starts with 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5110.Mounting the device requires Surface Mount.As a result, it is configured with 10 pins when it is designed.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.5A is the maximum output current.Components with 10 pins are available.There are 2 outputs integrated for its basis.This device supports a current output of 5A at the output.The supply current should be kept at 2mA to ensure higher stability.A quiescent current of 1mA is the amount of current this part consumes when it is not being impacted by outside factors.
LM5110-3SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
Quiescent current of 1mA
LM5110-3SDX/NOPB Applications
There are a lot of Texas Instruments LM5110-3SDX/NOPB gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Isolated switch mode power supplies (SMPS)
- AC-DC Inverters
- DC-DC Converters
- Welding
- Active filtering
- Pulse transformer drivers
- Industrial Power Supplies
- Automotive Applications
- Dual-Battery Systems
